DIY Potting Bench (Made Entirely of 2 x 4s)

This potting bench is the perfect project for a beginner builder because it’s made entirely of 2x4s and uses simple, straight cuts. You can easily choose to omit the back panel as well, making this an easy to build potting table with a storage shelf underneath.

how to make your own potting bench with 2 x 4s

Although I love a good DIY project that uses power tools, I must admit, I really wouldn’t consider myself much of a builder.  I can repair broken furniture or screw together a couple of pieces of wood for a tabletop or a sign, but build something from scratch?  The thought of it made me a little nervous.

This post contains affiliate links. Read my full disclosure policy here.

Now that I’m comfortable using my Kreg Jig K4 Pocket Hole Systemblank, I started noticing that a lot of building projects require primary cuts, and something like a Kreg Jig that can easily join together pieces of wood, and that’s it!  I can cut down boards and use a drill, so I set out to try my hand at this DIY carpentry thing with a DIY potting bench, made entirely of 2 x 4s.

potting bench made from 2 x 4s

Wood and Cuts to Make a Potting bench

To keep things easy, the only size of wood I used was 2 x 4s.  The great thing about it was it kept the project super easy for a beginning, and super low cost.  I got my 2 x 4s on sale for $1.98 each! (Clearly, this post was written a few years ago when lumber didn’t cost an arm and a leg. Right now in 2023, an 8 foot 2×4 is between $3 and $4 in my area.)

2 x 4 project

 I ended up needing 11 – 8 foot boards, but I bet if I figured out a better way to have less excess on my cuts, I probably could have ended up only needing 10. Here are the measurements and cuts needed to make this potting bench.

Cut List

  • 5 – 48″ boards (top)
  • 2 – 32″ boards (front legs)
  • 2 – 64″ boards (back legs)
  • 6 – 13.5″ boards (side supports)
  • 5 – 43″ boards (bottom shelf)
  • 5 – 43″ boards (back and front supports, and last board on the top)

Other Helpful Supplies

How to Assemble the Potting Bench

diy potting bench tutorial 2

1. Build the side legs

You’ll start by assembling one of the sides.  I drilled two holes into each side of the 13.5″ boards, and then screwed those into the front and back legs.  After I made the first side, I used it as a guide to be sure the side supports were at the same place on the second side.

project made with 2 x 4s

2. Attach back support

After the sides were assembled, I attached the back support on the bottom.  I lined it up with the two side supports on the bottom, and screwed it into place. From here on out, when I mention that I screwed it together, please know that I first drilled my holes into the board with the Kreg Jig, and then screwed the boards together using those pilot holes.  If you don’t have a Kreg Jig, you could also just screw into the face of one of the pieces of wood, straight through it, and then into the adjoining board.  It just means you’d be able to see the screws on the faces of the boards.

Install bottom shelf boards

2 x 4 potting bench tutorial

After that back support piece was attached, I screwed each of the bottom shelf boards to the sides.  It’s helpful to screw all the boards on to one leg first. Then, after all of the boards are screwed in on one side, attach the other side of the boards to the other lef.

I found that when I screwed the whole bottom board in place on both sides, the sides were attached too tightly for the other next boards to fit in.  

Attach front and back support boards

diy potting bench tutorial

After the bottom was installed, I attached the front and back supports and at this point, my girls said I had made them the perfect house!  Well, I can’t take all the credit.  My little two year old loves to help me build.

little helper

I walked away for a second to grab something, and she was already hard at work!  Bad mom?  Maybe, but something tells me she’s going to love power tools just like her mama, and I’m quite alright with fostering girl power!

4. Building the tabletop

potting bench tutorial

Here’s where I needed the help of my handy husband.  Whenever you’re screwing pieces together, it’s important to keep them flush together.  I really should invest in some clamps to help with this, but for all the other joints, I just held the pieces in place and it worked fine.  Screwing boards together on a flat plane is a little harder, and I’ve found it needs extra resistance for the boards to attach together perfectly flat.  I would actually recommend using a Face Clamp, but since I don’t have one, I needed the help of my husband.  I always have him stand on the joint I’m screwing together, and it works out pretty well.

potting bench tutorial 2

This is the top of the potting bench.  You can see the pocket holes where I screwed together the boards.

diy potting bench tutorial 4

Then, I placed it on top of the bench, and screwed it in place.  (Quick note – be sure to drill some pocket holes in the back, front, and side supports on the top that will go up into the top when it’s in place.  I almost forgot to do this!  The arrows in the image show where to have some pocket holes pre-drilled.  You’d also add a few on the inside of the front board as well.)

5. Add finishing touches

After everything was put together, I got a little too excited and completely forgot to take the rest of the process pictures!  Basically, I used a jigsaw to drill a hole in the top of the bench (completely optional) to fit a vintage enamel bowl I found at a flea market last summer.

diy potting bench made of 2 x 4s

Then, I used my HomeRight Sprayer to spray on two coats of outdoor paint in a satin finish.  This potting bench will be in a semi-enclosed area, so it’s not completely sheltered from the elements, and I wanted to give it the best chance at survival.

make your own potting bench with 2 x 4s

The bright green color just makes me crave spring, and to be able to plant all my little seedlings outside!

cheap and easy diy potting bench

I can’t tell you how fun it was to complete this project, and how proud I felt when it was completed.  To be unsure if I could accomplish something I’ve never tried before, and then to feel pretty successful at it, just feels great.

diy potting bench from 2 x 4s

Plus, it only cost me a total of $40 to make it – including all the boards, screws, and paint.

diy potting bench tutorial and cut list

I attached some chicken wire I had laying around to the back of the boards.  I’m thinking I’ll hang some S hooks and use it to store gardening equipment.

diy potting bench made only with 2 x 4s tutorial

Anyone else out there that can’t wait to get gardening?!

I adapted my plans from this 2 x 4 vanity.  This site actually has complete building plans, so you might find it helpful.  Or, you might find a different project you want to complete!

how to build a potting bench with easy tutorial using only 2 x 4s and straight cuts great for beginners

Other projects to help you DIY your garden:

No posts

Jenny at Refresh Living (dev.refreshliving.com)

Post by Jenny Leads

Jenny is the voice behind Refresh Living. She has a passion for helping people to create a home they love without spending a lot of money.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

11 Comments

    1. Green just makes me happy! I don’t put enough of it in my home because I’m scared, but I figured outside is the perfect place to bring on the bright. Thanks, LZ!

      1. Hey Jenny! I know this was a post from long ago, but do you happen to remember the name of that green color paint?

        1. I still have the can! It’s called Feeling Lucky by Dutch Boy (128-6DB). I’m not sure if it’s still a current color, but I’m pretty sure you can bring the name and number to anywhere for a color match.

  1. Oh my goodness! I love your DIY potting bench and totally need one for all the flowers I need to plant this spring. Pinning!

    Thank you so much for linking up with The DIY Collective! Please join us again next week!

  2. What a great project. From your excellent tute…I think even I could build it. Love that color, too. Thanks so much for linking to Friday’s Furniture Fix. We love having you share with us. Susie from The Chelsea Project

  3. I would totally under mount the bowl of potting soil and make a lid. That way messes are easily cleaned up and when not in use, you can use it for something else. Just my two cents. 😉 It’s still better then what I’m currently using which is a foldable table.

  4. Love your potting bench and the color is perfect. You did a great job. Please stop by Thursday Favorite Things tomorrow since you are one of my featured posts.
    Hugs,
    Bev